DW Series Mesh belt Drying Oven(Dryer Oven Machine)for food stuff ,
pharmaceutical
Description
The mesh belt dryer is a drying device that uses the steel mesh as
the conveyor belt to carry the material for continuous drying.
Since the conveyor belt is mesh, it is very suitable to dry various
materials of regular shapes or irregular shapes.
This machine is a continuous penetrating flow drying equipment
applied for drying material in strip ,particle or slice state and
with good ventilation.The machine is suitable for the materials
such as DE-watering vegetable, herbal medicine of traditional
Chinese medicine and others, for which the water contents are high
and high drying temperature is not allowed. For our DW series mesh
belt dryer , it is one of our main equipments and very hot machine
in our company.there are two types of mesh belt dryer , one is for
drying the material, and the other is for cooling the material .
The biggest difference between two machines is the mesh .
| Material: | SUS316/SUS304/ CARBON STEEL ,ETC | Heating Source: | Steam / Electrical/ Natural Gas / Diesel / Etc; |
| Temp.: | 10-350℃ | Water Evaporation: | 100-3000kg/h |
| Motor: | ABB / SIEMENS/ SEW | Document: | FAT/ IQ / OQ / PQ |
Product details
【DW-P Pharmaceutical Mesh belt Drying Oven】, Wholesale Various High
Quality【DW -P Pharmaceutical Mesh belt Drying Oven】【DW -P
Pharmaceutical Mesh belt Drying Oven】Suppliers and【DW -P
Pharmaceutical Mesh belt Drying Oven】
Technical parameters
| Type | DW-1.2-8 | DW-1.2-10 | DW-1.6-8 | DW-1.6-10 | DW-2-8 | DW-2-10 |
| Unit number | 4 | 6 | 4 | 6 | 4 | 6 |
| Belt Width (m) | 1.2 | 1.2 | 1.6 | 1.6 | 2 | 2 |
| Drying section Length (m) | 8 | 10 | 8 | 10 | 8 | 10 |
| Thickness of fed material (mm) | 10-80 |
| Temperature ℃ | 60-130 |
| Steam Pressure (Mpa) | 0.2-0.8 |
| steam Consumption (Kgsteam/KgH2O) | 2.2-2.5 |
| Drying strength (KgH2O/h) | 6-20 kg/m2.h |
| Total power of blower (Kw) | 3.3 | 4.4 | 6.6 | 8.8 | 12 | 16 |
| total power of plant KW | 4.05 | 5.15 | 7.35 | 9.55 | 13.1 | 17.1 |
Principle
The materials are uniformly distributed on the mesh-belt by the
material feeder. The mesh-belt generally adopts 12-60 mesh
stainless steel mesh and it is drawn by a transmission device and
move inside the dryer. The dryer is composed of several sections.
For each section the hot air is circulated separately. Part of
exhausted gas is exhausted by a special moisture exhaust blower.
The waste gas is controlled by an adjustment valve. The hot air
passes through the mesh-belt covered with bring water material
away. The mesh-belt moves slowly, running speed can be freely
adjusted according to the material property. The final products
after the drying process will fall into the material collector
continuously. The top and low circulation units can be freely
equipped according to client requirements.
Advantage
1. High efficiency, low consumption and easy operation
2. No pollution,have heat insulating layer;fast heating,convenient
to start and stop
3. The speed of mesh belt dryer could be controlled
4. The temperature of the mesh belt dryer could be adjustable
according to the buyer demands.
Features
① Most hot air is circulated in the cabinet, heat efficiency is
high and save energy.
② Use forced ventilation and cross flow type drying principle,
there are air distribution plates in the cabinet and material is
dried uniformly.
③ Low noise, stable operating, self-control temperature and
convenience to install and maintain.
④ Wide scope of application, it is suitable for all kinds material,
and is the general type drying equipment
⑤ Common control(Button control)or PLC and touch screen control are
on request
⑥ Temperature controllable ;
⑦ Store memory of work-program mode and technological parameter and
printing function (According to client’s requirements)
Flow chart
Single layer mesh belt dryer
Multi-layer mesh belt dryer
Application
De-watering vegetable, particle feed, gourmet powder, shredded
coconut stuffing, organic color, compound rubber, medicine product,
medicine material, small wooden product, plastic product, aging and
solidification for the electronic component and device..
Production process
Design → Raw material inspection →laser cutting machine→ Welding→
Inspection → Polishing → Inspection→Assembling → inspection →
Package → Delivery
From design to assembly and then ship the unit, every step we
require our workers to control the quality strictly, so that each
unit can be delivered perfectly.
Specialized machine for vegetable
| unit | three units series specialized machine for vegetable | five layers specialized machine for vegetable(Frame type) |
| model | | DWP-2-10-3 | DWF-2-10-3 | DW5-3-12 |
| effective belt width | m | 2 | 2 | 3 |
| effective belt length | m/unit | 10 | 10 | 12 |
| tandemquantity | | 3 | 3 | |
| Layer no. | | | | 5 |
| vegetable capacity | Kg/h | 600 | 720 | 2000 |
| Evaporation strength | Kg/h | 400~510 | 480~640 | 1440~1800 |
| consumption of steam | Kgsteam/KgH2O | 2.2~2.5 | 2.2~2.5 | 2.2~2.4 |
| heat radiation area | M2 | 900 | 1440 | 2600 |
| total power of the plant | KW | 70 | 52 | 150 |
| overall size | m | 33.2×2.58×2.8 | 33.2×2.27×2.85 | 15.3×4.3×8.5 |
| heat source type | | steam, thermal conduction oil, hot air furnace, electric |
Specialized machine for feedstuff (frame type)
| Specialized machine for feedstuff (frame type) |
| Type | | DWZ-3×12 |
| Effective belt width | m | 3 |
| Effective belt length | m/unit | 12 |
| Operation Temperature | ℃ | 80-130 |
| Steam Pressure | Mpa | 0.4-0.8 |
| Drying time | min | 35-50 |
| Thickness of fed material | cm | 5-8 |
| Steam consumption | kg/h | 6-20 |
| Drying strength | Kgsteam/kgH2O | 2-2.4 |
| Total power of plant | kw | 76 |
| Overall sizes | m | 15.1×4.3×3.4 |
